The floor mounted AFQm multilevel active filters are the most complete solution for solving power quality problems in three-phase industrial, commercial or service installations caused by the presence of harmonics and the consumption of reactive power. These following characteristics and functions have been implemented in the cabinet type active filters:
Key Features
Filtering capacity per module of 100 A (400 … 480 Vac) and 70 A (550 … 690 Vac), capacity per cabinet between 100 … 400 A (400 … 480 Vac) and 70 … 280 A (550. .. 690 Vac).
Cabinets expandable with small-sized rack modules.
Range for installations with 3 wires (3W model to 690 Vac) or 4 wires (4W model to 550 Vac).
Multi-range voltage and dual frequency (50/60 Hz).
Reduction of harmonic currents up to the fiftieth harmonic (2,500 Hz)
Selection of harmonic frequencies to be filtered for maximum filter effectiveness.
Power factor correction both inductive and capacitive .
Phase current balancing, improvement of consumption in neutral (4W model).
If higher filtering capabilities are required, the system can be expanded using AFQm racks connected in parallel (all filters/racks must be of the same 3- or 4-wire model).
Technical Specifications
AC power supply
AFQm-3WP-200C-480 AC power supply
Nominal voltage
208 … 480 V ~ F-F (±10%)
Frequency
50 / 60 Hz (±5%)
Consumption
4140 W
Installation category
4 kV, CAT III Class 1
Electrical characteristics
AFQm-3WP-200C-480 Electrical characteristics
Maximum phase current
200 A (RMS)
Current crest factor
2:1
Rated peak current Ipk
84 kA
Conditional short-circuit current (Icc)
40 kA
Rated diversity factor (RDF), simultaneity
1
Earthing system
TN, TT
Current measurement circuit
AFQm-3WP-200C-480 Current measurement circuit
Transformation ratio
5 … 5000/5 A
Measurement accuracy
AFQm-3WP-200C-480 Measurement accuracy
Voltage harmonics (THD)
25% (max.)
Power supply output
AFQm-3WP-200C-480 Power supply output
Power
152600 VA
Serial communication
AFQm-3WP-200C-480 Serial communication
Technology / Type
RS-485
Protocol
Modbus/RTU
Communication Network
AFQm-3WP-200C-480 Communication Network
Technology / Interface
Ethernet
Protocol
TCP/IP, Modbus TCP
User interface
AFQm-3WP-200C-480 User interface
Display type
TFT color, 3.5" touchscreen
Environmental characteristics
AFQm-3WP-200C-480 Environmental characteristics
Working temperature
-10 … +45 °C
Storage temperature
-20 … +50 °C
Relative humidity (without condensation)
0 … 95%
Protection class
IP 21 (IP 41 on demand) / IK10
Mechanical characteristics
AFQm-3WP-200C-480 Mechanical characteristics
Envelope
Free-standing sheet steel cabinet, for indoor installation, without removable parts.
Connection type
Network: plate 40 × 5, Ground: 8 mm ring terminal, Current: spring 2.5 mm², Neutral: plate 80 × 10, Ethernet: RJ-45
Weight (kg)
248
Size (width × height × depth)
608 × 1890 × 812 mm
Features / performance
AFQm-3WP-200C-480 Features / performance
Filtering / Response time
2nd … 50th harmonic (selectable) / <100 µs
Phase compensation
Selectable
Reactive power compensation (kvar)
Selectable
Priority scheduling
Selectable
Parallel assembly / installation
Up to 100 units, with different gauges. Transformer connection only to the Master unit
They are an ideal solution for installations with a large amount of single-phase and three-phase loads generating harmonics, such as computers, UPS units, lights, lifting equipment, air-conditioning systems with variable speed drives, etc. They can also be used in installations that require a good power quality for the purpose of increasing production efficiency and improve supply continuity in the system.
Need more detailed information?
View the official product documentation, manuals and technical resources.
