Power Factor Correction and Harmonic Filtering
CHV-T 750/11
Three-phase MV power capacitors
Code: R8L750001100E
Overview
CHV medium-voltage capacitor, made up of different basic capacitive elements.
These basic units are connected in series and parallel with the purpose of obtaining the power at the necessary voltage.
All the elements are protected by an internal fuse. This fuse is disconnected if a fault is detected, isolating only the basic unit that has been damaged. Internal fuse protection ensures greater system safety and service continuity.
Technical Specifications
Electrical characteristics
| Voltage | 11000 V |
|---|---|
| Surge | 1.1 A 12 h in 24 hours / 1.15 A 30 min in 24 hours / 1.2 A 5 min in 24 hours / 1.30 A 1 min in 24 hours |
| Discharge resistance | Location: Indoor / Discharge time: ≤10 minutes / Residual voltage: ≤75 V |
| Power | 750 kvar |
| Losses (W) | ≤0,15 W / kvar |
Environmental characteristics
| Installation, location, position | Indoor / Outdoor |
|---|
Mechanical characteristics
| Envelope | Stainless steel painted RAL 7035. With 2 wings for fixing to the frame to avoid mechanical stress on the porcelain terminals. |
|---|---|
| Fastening | Horizontal or vertical |
| Material | Dielectric: Rough polypropylene film / Electrode: Laser-cut aluminium foil / Impregnating oil: SAS-40E or M/DBT (PCB-free) |
| Weight (kg) | 92,1 |
| Size (width × height × depth) | 350 × 1252 × 200 mm |
Isolators
| Material | Porcelain |
|---|---|
| Pollution level | 16 mm / kV |
| Insulation level | 28/75 kV |
Standards
| Standards | IEC 60871-1, IEC 60871-5 |
|---|
Applications
CHV-T capacitors are used to build static and automatic capacitor banks of up to 12 kV.
The stainless-steel box of the CHV-T makes it a versatile product that can be used in indoor and outdoor applications.
Need more detailed information?
View the official product documentation,
manuals and technical resources.
