Protection and Control
WGC-80
Residual current transformer
Code: P10154
Overview
This new range features a series of improvements intended in particular for installing units on switchboards. Along with the usual attachment elements, this unit can be installed on DIN rails using an accessory, which facilitates its installation.
The residual current transformers of the WGC series offer better immunity to the transient current spikes that usually trigger the residual current protection. The residual current transformers of the WGC series have been designed to operate with the relays of the WGC series. The sensitivity (trip current) of the transformer-relay assembly is established by the associated relay.
Technical Specifications
AC power supply, insulation
| Pulse test (kV) | 3 kV |
|---|
Current measurement circuit
| Transformation ratio | 30 / 0,06 A |
|---|---|
| Maximum operating voltage (Um) | 720 V |
| Dynamic current (Idyn) | 2,5 Ith |
| Thermal short-circuit current (Ith) | 1,8 kA / 1 s |
| Permanent thermal current (Icth) | 60 A |
Measurement accuracy
| Accuracy | 10 … 15% |
|---|
Environmental characteristics
| Working temperature | -20 … +70 °C |
|---|---|
| Relative humidity (without condensation) | 5 … 95% |
| Protection class | IP20 (Terminals), IEC 60529 |
Mechanical characteristics
| Envelope | Self-extinguishing polycarbonate UL 94 V0 |
|---|---|
| Fastening | DIN rail with accessory (see code) |
| Connection type | Screw terminal (PZ type) |
| Weight (kg) | 0,288 |
| Size (width × height × depth) | 124.5 × 130 × 50 mm |
Standards
| Standards | IEC 60664-1, IEC 60664-3, IEC 60044-1 |
|---|---|
| Electrical safety, Installation category | CAT III |
| Electrical safety, Maximum height (m) | 2000 |
Need more detailed information?
View the official product documentation,
manuals and technical resources.
